ksd-t6o027-000 1 STC4073D npn silicon transistor to-252 pin connection descriptions ? general purpose amplifier ? high voltage application features ? high collector breakdown voltage : v ceo = 120v ? low collector saturation voltage : v ce(sat) =0.5v(max.) ordering information absolute maximum ratings (ta=25 c) characteristic symbol ratings unit collector-base voltage v cbo 120 v collector-emitter voltage v ceo 120 v emitter-base voltage v ebo 6 v i c 1 a(dc) collector current i cp * 2 a(pulse) p c (ta= 25 c) 1 collector power dissipation p c (t c = 25 c) 10 w junction temperature t j 150 c storage temperature t stg -55~150 c * : single pulse, tp= 300 ? type no. marking package code STC4073D stc4073 to-252 : year & week code
ksd-t6o027-000 2 STC4073D electrical characteristics (ta=25 c) characteristic symbol test condition min. typ. max. unit collector-base breakdown voltage bv cbo i c =100 a, i e =0 120 - - v collector-emitter breakdown voltage bv ceo i c =1ma, i b =0 120 - - v emitter-base breakdown voltage bv ebo i e =100 a, i c =0 6 - - v collector cut-off current i cbo v cb =120v, i e =0 - - 0.1 ? emitter cut-off current i ebo v eb =4v, i c =0 - - 0.1 ? dc current gain h fe 1) v ce =5v, i c = 30 ? 200 - 400 - i c =500 ? , i b =50 ? - - 0.5 v collector-emitter saturation voltage v ce(sat) 2) i c =100 ? , i b =10 ? - 0.1 v base-emitter saturation voltage v be(sat) 2) i c =500 ? , i b =50 ? - - 1.2 v transition frequency f t v ce =5v, i c = 50 ? - 170 - ? collector output capacitance c ob v cb =10v, i e =0, f=1 ? - 10 - ? * note 1) hfe rank : 200~400 only * note 2) pulse tester : pulse width 300 s, duty cycle 2.0%
ksd-t6o027-000 3 STC4073D electrical characteristic curves fig. 1 p c - ta fig. 6 h fe- i c fig. 4 i c - v ce fig. 2 i c - v be fig. 3 v ce ( sat ) - i c fig. 5 i c - v ce
ksd-t6o027-000 4 STC4073D electrical characteristic curve s * * * fig. 11 f t - i c fig. 12 safe operating area fig. 10 cob - v cb fig. 7 h fe- i c fig. 8 h fe- i c fig. 9 h fe- i c
ksd-t6o027-000 5 STC4073D outline dimension recommend pcb solder land [unit: mm] 4.60 1.50 2 . 5 0 7 . 0 0 7.00
ksd-t6o027-000 6 STC4073D the auk corp. products are intended for the use as components in general electronic equipment (office and co mmunication equipment, m easuring equipment, home appliance, etc.). please make sure that you consult with us before you use these auk corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). auk corp. cannot accept liability to any damage which may occur in case these auk corp. products were used in the mentioned equi pments without prior consultation with auk corp.. specifications mentioned in this publicati on are subject to change without notice.
|
